A radiation free alternative to CBCT volumetric rendering for soft tissue evaluation / Um método alternativo à TCFC sem radiação ionizante para a avaliação de tecidos moles da face

Objective: The aim of the present study is to evaluate whether a "radiation free" method using 3D facial scan can replace Cone Beam Computed Tomography (CBCT) volumetric rendering of soft tissue of the patient to assess maxillofacial surgery outcomes and compare the reference points and angular measurements of patient facial soft tissue. Material and Methods: Facial soft tissue scan of the patient's face, before and after orthognathic surgery and a CBCT of the skull for volumetric rendering of soft tissues were carried out. The 3D acquisitions were processed using Planmeca ProMax 3D ProFace® software (Planmeca USA, Inc.; Roselle, Illinois, USA). The participant were positioned in a natural position during the skull scannering. Three sagittal angular measurements were performed (Tr-NA, Tr-N-Pg, Ss-N-Pg) and two verticals (Go-N-Me, Tr-Or-Pg) on facial soft tissue scan and on the patient's 3D soft tissue CBCT volumetric rendering. Results: A certain correspondence has been demonstrated between the measurements obtained on the Proface and those on the CBCT. Conclusion: A radiation free method was to be considered an important diagnostic tool that works in conditions of not subjecting the patient to harmful ionizing radiation and it was therefore particularly suitable for growing subjects. The soft tissue analysis based on the realistic facial scan has shown sufficient reliability and reproducibility even if further studies are needed to confirm the research result.(AU)

Objetivo:Avaliar se um método "livre de radiação" usando escaneamento facial 3D pode substituir a renderização volumétrica da tomografia computadorizada de feixe cônico (TCFC) dos tecidos moles do paciente para analisar os resultados da cirurgia maxilofacial e comparar os pontos de referência e medições angulares afim de avaliar a correspondência entre as duas metodologias. Material e Métodos: Foi realizado o escaneamento dos tecidos moles faciais do paciente, antes e depois da cirurgia ortognática e uma tomografia computadorizada de feixe cônico do crânio para renderização volumétrica dos tecidos moles. As aquisições 3D foram processadas usando o software Planmeca ProMax 3D ProFace® (Planmeca USA, Inc.; Roselle, Illinois, USA). O participante foi posicionado em posição natural durante o escaneamento do crânio. Três medições angulares sagitais foram realizadas (Tr-NA, Tr-N-Pg, Ss-N-Pg) e duas verticais (Go-N-Me, Tr-Or-Pg) nas imagens de scaneamento e nas imagens do tecido mole facial da reconstrução tridimensional da TCFC. Resultados: Uma certa correspondência foi demonstrada entre as medidas obtidas no Proface® e aquelas na TCFC. Conclusão: Um método livre de radiação deve ser considerado uma importante ferramenta de diagnóstico que funciona em condições de não submeter o paciente a radiação ionizante nociva e, portanto, é particularmente adequado para indivíduos em crescimento. A análise de tecidos moles com base na varredura facial realista mostrou confiabilidade e reprodutibilidade, porém mais estudos são necessários para confirmar o resultado da pesquisa. (AU)

In Vitro Evaluation of a Recently Developed Rotary File: AF Rotary / Avaliação in vitro de um arquivo rotativo desenvolvido recentemente: AF Rotary

Objective: Aim of the present study is to evaluate mechanical properties of a newly developed rotary file, AF Rotary (Fanta Dental, Shanghai, China), and to compare these features with a worldwide spread rotary file, Protaper Gold F2 (PTG F2; Dentsply Maillefer, Ballaigues, Switzerland). Material and Methods: 60 AF Rotary 25.06 and 60 PTG F2 were divided in three groups of 20 files each. A group underwent to cyclic fatigue resistance tests, second group underwent to torsional resistance tests, third group underwent to bending tests. The statistical analysis was performed using t student test with significance level set at 95% (p < 0.05). Results: AF Rotary showed significantly higher torsional resistance and cyclic fatigue resistance (p < 0.05) when compared to the PTG F2. AF Rotary also showed significantly lower bending resistance (p < 0.05) when compared to the PTG F2. Conclusion: Therefore, within the limitations of this study, the results show better performances for AF Rotary compared to PTG F2 regarding the cyclic fatigue test, the torsional test and the bending test. Since the PTG F2 is a commonly used and widely investigated instrument it could be possible to state that the AF Rotary exhibits remarkable in vitro performances. (AU)

Objetivo: O objetivo do presente estudo é avaliar as propriedades mecânicas de uma lima rotativa recém-desenvolvida, AF Rotary (Fanta Dental, Shanghai, China), e comparar essas características com uma lima rotativa mundialmente difundida, Protaper Gold F2 (PTG F2; Dentsply Maillefer, Ballaigues, Suíça). Material e Métodos: 60 AF Rotary 25.06 e 60 PTG F2 foram divididos em três grupos de 20 arquivos cada. Um grupo foi submetido a testes de resistência à fadiga cíclica, o segundo grupo foi submetido a testes de resistência à torção, o terceiro grupo foi submetido a testes de flexão. A análise estatística foi realizada por meio do teste t student com nível de significância de 95% (p <0,05). Resultados: AF Rotary apresentou resistência torcional e resistência à fadiga cíclica significativamente maiores (p <0,05) quando comparado ao PTG F2. AF Rotary também apresentou resistência à flexão significativamente menor (p <0,05) quando comparado ao PTG F2. Conclusão: Portanto, dentro das limitações deste estudo, os resultados mostram melhores desempenhos do AF Rotary em relação ao PTG F2 no que diz respeito ao teste de fadiga cíclica, ao teste de torção e ao teste de flexão. Uma vez que o PTG F2 é um instrumento comumente usado e amplamente investigado, pode-se afirmar que o AF Rotary exibe desempenhos in vitro notáveis. (AU)

Torsional Resistance of Two New Heat Treated Nickel Titanium Rotary Instruments: An in Vitro Evaluation

Abstract Objective: To evaluate the difference in torsional resistance, angular deflection and fragment length between two new rotary instruments: AF Blue S4 and S-One. These files share all features except cross-sectional design. Material and Methods: A total of 40 new Nickel-Titanium instruments of 25 mm in length were tested in this study and divided in two groups: 20 AF Blue S4, tip 25 and constant 6% taper and 20 AF-Blue S4 tip 25 and constant 6% taper. The torsional test was performed by the use of a torque recording endodontic motor (KaVo, Biberac, Germany). Torque to Fracture (TtF), Angular Deflection (AD) and Fragment Length (FL) was recorded for each instrument. To ensure an immovable block at 3mm of the instrument tip, an auto-polymerizing resin (DuraLay; Reliance Dental Mfg Co, Worth, IL) was used. Each file was rotated clockwise at a speed of 300 rpm until fracture occurred. Results: Group A (AF Blue S4) showed higher TtF and AD than Group B (S-One), and statistical analysis found significant differences between the two instruments (p<0.05). The mean values for FL showed no significant differences (p>0.05) between the two instruments. Conclusion: The AF Blue S4 seems to have a higher resistance to torsional stress in vitro. Clinically, the use of AF Blue S4 could be safer in narrow canals.

Efficacy of sonic and ultrasonic irrigation devices in the removal of debris from canal irregularities in artificial root canals

Abstract Objective To evaluate the efficacy of different sonic and ultrasonic devices in the elimination of debris from canal irregularities in artificial root canals. Materials and Methods A resin model of a transparent radicular canal filled with dentin debris was used. Five groups were tested, namely: Group 1 - ultrasonic insert 15.02; Group 2 - ultrasonic insert 25/25 IRRI K; Group 3 - ultrasonic insert 25/25 IRRI S; Group 4 - sonic insert 20/28 Eddy on a vibrating sonic air-scaler handpiece; Group 5 - 20.02 K-file inserted on a Safety M4 handpiece. Two different irrigants (5% sodium hypochlorite and 17% EDTA) and 3 different times of activation (20, 40, and 60 seconds) were tested. Means and standard deviations were calculated and statistically analyzed with the Kruskal-Wallis and Wilcoxon tests (p<0.05). Results No statistically significant differences were found between the two irrigants used. Group 4 removed more debris than the other groups (p<0.05). Groups 1, 2, and 3 removed more debris than group 5 (p<0.05). A statistically significant difference (p<0.05) was found for the time of activation in all groups and at all canal levels, except between 40 and 60 seconds in group 4 at coronal and middle third level (p>0.05). Conclusions No significant differences were found between 5% sodium hypochlorite and 17% EDTA. When the time of activation rises, the dentin debris removal increases in all groups. Both sonic and ultrasonic activation demonstrate high capacity for dentin debris removal.

New Technologies to Improve Root Canal Disinfection

Abstract Effective irrigant delivery and agitation are prerequisites to promote root canal disinfection and debris removal and improve successful endodontic treatment. This paper presents an overview of the currently available technologies to improve the cleaning of the endodontic space and their debridement efficacy. A PubMed electronic search was conducted with appropriate key words to identify the relevant literature on this topic. After retrieving the full-text articles, all the articles were reviewed and the most appropriate were included in this review. Several different systems of mechanical activation of irrigants to improve endodontic disinfection were analysed: manual agitation with gutta-percha cones, endodontic instruments or special brushes, vibrating systems activated by low-speed hand-pieces or by sonic or subsonic energy, use of ultrasonic or laser energy to mechanically activate the irrigants and apical negative pressure irrigation systems. Furthermore, this review aims to describe systems designed to improve the intracanal bacterial decontamination by a specific chemical action, such as ozone, direct laser action or light-activated disinfection. The ultrasonic activation of root canal irrigants and of sodium hypochlorite in particular still remains the gold standard to which all other systems of mechanical agitation analyzed in this article were compared. From this overview, it is evident that the use of different irrigation systems can provide several advantages in the clinical endodontic outcome and that integration of new technologies, coupled with enhanced techniques and materials, may help everyday clinical practice.

Resumo A irrigação do canal radicular é coadjuvante na desinfecção e remoção de debris, contribuindo para o sucesso do tratamento endodôntico. Este artigo apresenta uma visão geral das tecnologias atuais indicadas para melhorar a limpeza e desbridamento do canal radicular. Foi realizado um levantamento bibliográfico eletrônico no site Pubmed utilizando palavras-chave específicas ao tema a fim de abordar literatura relevante. Após busca eletrônica, artigos completos foram revisados e os mais apropriados ao tema foram incluídos nesta revisão. Diferentes sistemas de ativação mecânica foram considerados: agitação manual com cone de guta-percha, instrumentos e escovas endodônticas, sistemas de vibração ativados por peças manuais em baixa rotação ou por energia sônica e subsônica, ultrassom, laser, assim como sistemas de irrigação que utilizam pressão apical negativa. Além disso, esta revisão descreve outros meios indicados para ampliar a descontaminação endodôntica por meio de agentes químicos como ozônio e desinfeção por meio de luz. A ativação ultrassônica do hipoclorito de sódio ainda permanece o padrão ouro e nos estudos é usada como controle na comparação aos demais sistemas que empregam agitação mecânica. A presente revisão mostra vantagens de diversos sistema de irrigação e associações entre eles, podendo aumentar a efetividade da irrigação endodôntica.